Hycon H98360 Hydraulic Filter Element Replacement
$138.85
This ISO Filtration hydraulic filter element is a direct replacement for the Hycon H98360 hydraulic filter element in form, fit, and function. The optimized filter media provides fine filtration, long life, and high dirt-holding capacity.
- Made in America for assured performance
- Quality ISO 9001:2015 certified manufacturing
- High-performance filter media tested to ISO 16889 protocols
LIVE UPS or LTL rates calculated on the checkout page
O.D. | 5.97" |
---|---|
I.D. Top | 4.13" |
I.D. Bottom | 4.13" |
Length Overall | 16.80" |
Construction Type | Double Open End, Optimized Microglass |
Efficiency | 5 Micron; B5 = 200, B7.7 = 1000 per ISO 16889 |
Gasket Material | Viton |
Wire Support | Yes |
Max Operating Pressure | 160 PSID Collapse |
Max Temp | 230 Degress F |
Weight Each | 6 |
Carton Qty | 1 |
Condition | New |
ISO Filtration Hycon H98360 Replacement Filter
Our Hycon H98360 replacement hydraulic filter is a guaranteed direct replacement in form, fit, and function. This means the filter will fit and you should expect performance to be equal to or greater than the OEM filter. Made in America.
Filtration Media for the Hycon H98360 direct interchange
Our filter media is backed by ISO 16889 multi-pass testing and other ISO/SAE test protocols and the filter is produced in an ISO Certified manufacturing facility. An ISO Certified manufacturing facility is all about quality control, consistency, responsibility, and being true to the design. Optimized microglass media is used for fine filtration, just like the Hycon H98360 hydraulic filter to be replaced. Our microglass filters use the optimal amount of media and pleats to ensure high dirt-holding capacity. The correct number and design of pleats in the element will give you the lowest initial pressure drop. Therefore the filter will take longer to reach its change-out pressure drop which is usually 25 PSID.
Micron Rating for the Hycon H98360 cross
This Hycon H98360 hydraulic filter replacement element is beta-rated. The filter performance is outstanding. The Beta X = 1000 number means that for every 1000 particles of x size in the fluid only one particle will pass through the filter on average.
- 5 Micron; B5 = 200, B7.7 = 1000 per ISO 16889 equivalent to efficiency of 99.9%
Filter Collapse Pressure for the Hycon H98360 cross reference
A filter collapse pressure of 160 PSID Collapse means that if the filter is completely clogged and the build up of pressure reaches or surpasses 160 PSID Collapse the filter may collapse and allow contamination downstream. Please use a satisfactory safety factor for the filter.
Visit the links below for more helpful information.
Our hydraulic filter is indicated as a replacement for Hycon H98360 and is not manufactured by or affiliated with the OEM or Brand listed. Part numbers and names are used for cross reference only. The element may vary from the image displayed on the left.